Feeder
Graphite powder or dust on the rollers inside the feeder may cause smudges to appear on printouts. If this occurs,
clean the feeder. If smudges still appear after you clean the feeder, run automatic feeder cleaning.
Cleaning the Feeder(P. 789)
Automatic Feeder Cleaning(P. 790)
Cleaning the Feeder
1
Turn off the machine and unplug it from the power outlet.
●
Turning the printer off erases any queued print data. Data such as documents received and held in memory,
documents waiting to be sent, and reports that are automatically printed after sending or receiving faxes are
not deleted.
2
Open the feeder cover.
3
Wipe the rollers in the feeder.
●
Wipe the rollers with a cloth that has been moistened with water and wrung out. Then wipe with a dry cloth.
4
Close the feeder cover.
5
Plug the machine back into the power outlet and switch it on.
Maintenance
789
0UWX-0CL