Specifying Registered Destinations - Canon MF419x User Manual

Specifying Registered Destinations

You can specify destinations by selecting them from the Address Book or coded dial numbers, as well as by using the
numeric keys. To use the Address Book or coded dial numbers, you need to register destinations beforehand. You can
also specify previously used destinations. If your office has an LDAP server installed, you can also specify a destination
using user information in the server.
Specifying from Address
Book(P. 154)
Specifying Destinations in an
LDAP Server(P. 162)
TIPS for Enhancing Security
● If you want to limit available destinations to ones from the Address Book, ones in an LDAP server, or
previously specified ones:
● If you want to disable specifying previously used destinations:
Destinations(P. 560)
LINKS
Sending Faxes (MF419x / MF416dw)(P. 149)
Registering in the Address Book(P. 78)
Registering LDAP Servers(P. 499)
Faxing
Selecting Destinations Directly
by Entering Coded Dial
Numbers(P. 156)
Limiting Available Destinations(P. 558)
153
Specifying Previously Used
Destinations(P. 159)
Disabling Use of Previously Used
0UWX-02J