When placing documents in the feeder in step 1
When scanning is complete, the save destination folder is displayed on the computer.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedure below (except if you selected JPEG as a file format).
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
.
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
2
Tap <Finish>.
➠
The save destination folder is displayed on the computer.
About the save destination folder
●
By default, the scanned data is saved to the My Documents folder. A subfolder named with the scanning
date is created, and the data is saved to that folder.
●
You can change the save destination from MF Scan Utility. For more information, click [Instructions] on MF
Scan Utility.
Scan from the machine more easily
●
To always scan using the same settings:
●
To register combinations of scan settings and display them when needed:
Scan Settings (E-Mail/I-Fax/Shared Folder/FTP Server)(P. 379)
Using the Machine as a Scanner
Changing Default Settings(P. 376)
308
Registering Frequently Used