Canon MF419x User Manual page 511

Select [Do Not Use], [Use], or [Use (Security Authentication)] depending on the type of authentication
implemented by the LDAP server. When [Use] or [Use (Security Authentication)] is selected, the user name and
password must be specified.
[Do Not Use]
[Use]
[Use (Security Authentication)]
[Display Authentication Screen When Searching]
Select the check box to require the user to enter the user name and password when a search is requested. If the
[Use Same Authentication Information as When Send Operation Started] check box is selected, the user name
and password used for authentication when sending scans are also used here.
[Use Same Authentication Information as When Send Operation Started]
This check box is normally displayed selected; however, it is only valid when the [Display Authentication Screen
When Searching] check box is selected.
[User Name]
Enter the user name of the machine that was registered to the LDAP server. Depending on the type of
characters used, up to 120 characters can be entered.
● When [Use] is selected for [Login Information], enter the user name in the form "(domain name)\(user
name)" (example: domain1\user1).
● When [Use (Security Authentication)] is selected, enter the user name only (example: user1).
[Set/Change Password]
To specify or change the password, select the check box and enter up to 24 characters in the [Password] text
box.
[Domain Name]
When [Use (Security Authentication)] is selected for [Login Information], enter up to 120 alphanumeric
characters for the directory tree name in Active Directory (example: example.com).
Registering the authentication server
If the use of the fax and scan functions is restricted, register the server used for authentication.
Network
Select not to authenticate the machine using the login information.
Select to authenticate the machine using the login information.
Select to use data obtained by Kerberos, a network authentication protocol, for the
authentication password. If this setting is selected, the clock of the machine needs to be
synchronized with that of the LDAP server.
502