KTM 690 Enduro R Owner's Manual page 64

SERVICE SCHEDULE
Check the front brake fluid level. (
Bleed the fork legs. ( p. 77)
Check the steering head bearing play. (
Change the spark plug.
Check the valve clearance. x
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect
routing.
x
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends and set correctly.
Change the air filter. Clean the air filter box.
Check the fuel pressure. x
Check the CO adjustment with the KTM diagnostics tool.
Check/rectify the fluid level of the hydraulic clutch. (
Check the screws and nuts for tightness.
Change the front brake fluid.
Change the rear brake fluid.
Check the clutch.
x
Check the headlight setting. (
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service record.
p. 100)
p. 79)
p. 144)
x
x
p. 95)
x
x
x
p. 142)
x
x
x
x
62
K10N K100A K200A
• • •
• •
• • •
•
• •
•
• • •
• •
• • •
• •
• •
• •
• •
• • •
•
•
•
• • •
• • •
• • •
• • •
• • •