SERVICE WORK ON THE CHASSIS
Removing the engine guard
10.21
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top level of container
»
If the level of the coolant does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
601788-10
–
Position the cover with the membrane. Mount and tighten the screws.
Preliminary work
–
Stand the motorcycle on its side stand on a horizontal surface.
Main work
–
Remove screws
–
Pull the engine guard forward out of the holders and set it down.
100198-10
.
1
with membrane
.
2
3
p. 196)
on the left and right.
1
4 mm (0.16 in)
96