WHEELS, TIRES
Main work
–
Check bearing
»
If the bearing is damaged or worn:
–
Replace the bearings.
–
Check rubber dampers
»
If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
100271-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check play
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
»
If play
A
100272-10
–
Change all rubber dampers in the rear hub.
Subsequent work
–
Install the rear wheel.
–
Remove the motorcycle from the lift stand. (
.
1
x
of the rear hub for damage and wear.
2
, hold the rear wheel tight and try to rotate the rear sprocket.
A
is larger than the specified value:
x
(
p. 119)
≤ 5 mm (≤ 0.2 in)
p. 76)
121