Checking The Riding Sag Of The Shock Absorber; Adjusting The Spring Preload Of The Shock Absorber - KTM 690 Enduro R Owner's Manual

TUNING THE CHASSIS

Checking the riding sag of the shock absorber

9.10

Adjusting the spring preload of the shock absorber

9.11
Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)
–
Measure distance
–
With another person holding the motorcycle, the rider, wearing full protective clothing,
sits on the seat in a normal sitting position (feet on footrests) and bounces up and down
0 0 A A
a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and a fixed point.
–
Note down the value as dimension
Info
The riding sag is the difference between measurements
–
Check the riding sag.
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
C 0 0 C
400990-10
x
of rear wheel unloaded. (
A
.
C
( p. 73)
x
p. 69)
and .
A C
71