TUNING THE CHASSIS
Adjusting the riding sag
9.12
x
Preliminary work
–
Raise the motorcycle with the work stand.
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Medium (standard)
Hard
201352-10
Subsequent work
–
Install the shock absorber.
–
Mount the side cover.
–
Mount the seat. (
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
x
Info
The spring rate is shown on the outside of the spring.
x
p. 82)
80 N/mm (457 lb/in)
85 N/mm (485 lb/in)
p. 70)
p. 68)
73