ELECTRICAL SYSTEM
Changing the headlight bulb
13.8
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position brake-hose guide
Guideline
Screw, headlight mask
601793-11
Preliminary work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
. Mount and tighten screws
4
M5
p. 134)
137
.
5
5 Nm (3.7 lbf ft)