Intermec EasyCoder F4 Installation & Operation Manual page 28

Ipl version bar code label printer

Hide thumbs Also See for EasyCoder F4:

Table of Contents

Peel-Off, cont.

Pull out the handle to collapse the takeup hub,

then remove any liner.

Fit a new roll of labels on the supply post and

adjust the edge guide so the roll becomes ﬂ ush

with the center section.

Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 1

Remove any empty core from the media supply

roll post. Remove the edge guide if necessary.

Remove labels from the ﬁ rst 50 cm (20 inches)

of the liner. Route the liner through the print

mechanism and push it inwards.

Chapter 4

Media Load

Table of Contents