MAINTENANCE WORK ON FRAME AND ENGINE
Checking the headlight setting
9.62
A
0 0 A
Adjusting the headlamp range
9.63
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B
0 0 B
Distance
–
Position the vehicle vertically at a distance
beam.
Guideline
400420-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlamp range. (
–
Check the headlight setting. (
under the first mark.
5 cm (2 in)
in front of the wall and switch on the low
5 m (16 ft)
p. 184)
p. 184)
184