KTM 2010 1190 RC8 Owner's Manual page 189

MAINTENANCE WORK ON FRAME AND ENGINE
The immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
according to the number of functioning black ignition keys including the orange
programming key. In this case once, since all black ignition keys are deacti-
vated.
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
All black ignition keys are deactivated.
–
Order a new black ignition key according to the key number on the KEYCODECARD
and activate it.
Activating ignition key:
You can activate or deactivate up to four black ignition keys. Only the black ignition
keys programmed during an activation procedure are valid. All black ignition keys not
programmed during the activation procedure are invalid, but can be reprogrammed in a
further activation procedure.
–
Press the emergency OFF switch into the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and flashes
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
187
.
.
.
.
.