MAINTENANCE WORK ON FRAME AND ENGINE
Adjusting the rebound damping of the fork
9.7
Info
The hydraulic rebound damping determines the fork suspension behavior.
An optimally adjusted rebound damping brakes the springing energy and enables a fast, vibration-free resetting of the fork to the
zero position.
–
Turn adjusting screws
Info
The adjusting screws are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
700253-01
Comfort
Standard
Sport
Full payload
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
clockwise until they stop.
15 clicks
10 clicks
5 clicks
5 clicks
113