MAINTENANCE WORK ON FRAME AND ENGINE
–
Take the weight off the rear wheel and swingarm.
Info
The spring preload can be adjusted correctly only if the rear wheel and the
swingarm are fully relieved of weight.
–
Loosen screw
700341-10
–
Turn the adjusting ring counterclockwise with the toolset wrench until the spring is
completely relaxed.
Hook wrench (69012022000)
Extension (60012060000)
–
Turn the adjusting ring clockwise and tension it to the specified value.
Guideline
Spring preload
Comfort
700342-01
Standard
Sport
Full payload
Info
Turn clockwise to increase preload, turn counterclockwise to reduce spring
preload.
two turns, but do not remove.
6 mm (0.24 in)
6 mm (0.24 in)
8 mm (0.31 in)
8 mm (0.31 in)
120