Adjusting The Play In The Throttle Cable; Handlebar Height - KTM 2010 1190 RC8 Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Adjusting the play in the throttle cable

9.72

Handlebar height

9.73
x
–
Move the handlebar to the straight-ahead position.
–
Throttle position sensor circuit A - check in zero position.
Info
It is imperative to use the KTM diagnostics tool for this.
–
Push back protective cover
–
Loosen counter nut
–
Set the play in the throttle cable by turning adjusting screw
700317-01
Guideline
Throttle cable play
–
Tighten counter nut
–
Mount the protective cover.
By removing or inserting spacing sleeves
ent positions.
Length of distance sleeve
With distance sleeves, the handlebar stub is positioned low for sports use. Removing the
distance sleeves gives a more upright sitting position.
Standard
700319-12
.

.

3... 5 mm (0.12... 0.2 in)
.

, you can set the handlebar height at two differ-

15 mm (0.59 in)

Low position with distance sleeve
195
x
.
