KTM 2010 1190 RC8 Owner's Manual page 188

MAINTENANCE WORK ON FRAME AND ENGINE
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black programming key to the position ON
EFI warning lamp
The immobilizer indicator lamp
on again.
–
Switch off the ignition by turning the black programming key to the position OFF
–
Remove the black ignition key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
according to the number of functioning black ignition keys including the orange
programming key. In this case, twice.
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
The lost black ignition key is deactivated.
The existing black ignition key is reactivated.
Loss of both black ignition keys (no black ignition key available):
This procedure is important to prevent misuse of the lost black ignition key.
–
Press the emergency OFF switch into the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and switches
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and flashes
.
(MIL) lights up, switches off, and then starts to flash.
186
.
.
.
.
.
.