Checking The Front Brake Linings - KTM 2010 1190 RC8 Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE
Info
Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construction and
friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM brake linings. If
brake linings are used that differ from the originals, there is no guarantee that they comply with the original license. The vehicle
no longer corresponds to the condition at delivery, and the warranty is no longer valid.

Checking the front brake linings

9.38
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately. (Your authorized KTM RC8 workshop will be pleased to help.)
Note
Danger of accidents Reduced braking efficiency caused by damaged brake discs.
–
If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are rendered unserviceable. Check the brake linings regularly.
–
Check all brake linings on both brake calipers to ensure they have minimum thick-
ness .

Minimum thickness
» If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check all brake linings on both brake calipers for damage and cracking.
» If damage or wear is encountered:
–
Change the front brake linings.
700263-01
≥ 1 mm (≥ 0.04 in)

x
x
148