Vehicle Level - KTM 2010 1190 RC8 Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Vehicle level

9.17
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the
vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behav-
ior.
The vehicle level can be adjusted at the front by means of the fork leg clamp and at the
rear by the eccentric shaft.
The fork legs can be clamped at three positions in the triple clamps.
Upper triple clamp flush with
upper edge of fork legs
Upper triple clamp flush with
1st ring of fork legs
Upper triple clamp flush with
2nd ring of fork legs (stan-
dard)
The chassis height can be adjusted steplessly by turning the eccentric shaft.
Chassis height difference
700333-01
HIGH - LOW
Maximum adjustment range
between HIGH - LOW
0 mm (0 in)
2.5 mm (0.098 in)
5 mm (0.2 in)
7 mm (0.28 in)
180°
123