MAINTENANCE WORK ON FRAME AND ENGINE
Adjusting the handlebar height
9.74
Info
The handlebar stub position must be identical on the left and right of the vehicle.
Adjusting the high position of the handlebar stubs:
–
Loosen screw
Info
Loosen the screw several turns to prevent damage to the fork lacquer when
moving the handlebar stub.
–
Remove screw
700318-01
–
Remove distance sleeve
–
All cables routed under the upper triple clamp must now be routed under the han-
dlebar stub.
–
Push the handlebar stub carefully up to the upper triple clamp.
–
Position the distance sleeve above the triple clamp.
–
Mount and tighten screw.
Guideline
Remaining frame bolts
700319-01
.
.
.
M5
5 Nm (3.7 lbf ft)
196