Steering/Fork; Changing The Front Fork Seals - PEUGEOT Django 125 Workshop Manual

STEERING/FORK

Changing the front fork seals

- Remove the front mudguard. See: Procedure 17.
page 29.
- Remove the brake caliper without disconnecting
it.
• 2 Ø 8 mm screw.
When refitting the brake caliper, spread
standard thread lock on the bolts.
- Unscrew and remove the 2 upper screws (1) from
the fork Tee.
- Before, loosen the fork tube caps (A).
- Unscrew the 2 lower screws (2) from the fork
Tee.
- Remove the fork stanchions.
- Remove the fork tube cap (A).
Check the condition of the O-rings (B).
- Remove the spring (C).
- Drain the front fork. See chapter : Draining the
front fork, page 60.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
A
B
STEERING/FORK
1
2
A
C
61