PEUGEOT Django 125 Workshop Manual page 80

- Remove the wheel trim.
- Remove the wheel (5 screw).
Tightening torque: 30 Nm.
- Remove the brake calliper (2 screw).
Tightening torque: 30 Nm.
When refitting the brake caliper, spread
standard thread lock on the bolts.
- Unclip the hydraulic control.
- Temporarily reinstall the wheel.
- Remove the protective shoe.
• 3 screw.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
POWER UNIT
79