Removal Of The Primary Transmission Cover; Removal Of The Starter System - PEUGEOT Django 125 Workshop Manual

SERVICE OPERATIONS

Removal of the primary transmission cover

- Remove the upper RH fairing. See: Procedure 6.
page 21
- Remove the 2 air filter box fixing bolts (A).
- Remove the transmission cover.
• 8 Ø6 mm screw.
Tightening torque: 10 Nm.
- Remove the paper gasket.
When re-installing, use a new gasket.

Removal of the starter system

- Remove the kickstart pedal.
• 1 Ø 8 mm screws.
36
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
A
A