Reassembly - PEUGEOT Django 125 Workshop Manual

Reassembly

- Install the expansion stop spring (E).
- Install the calibrated hydraulic tube (D).
- Install the compression stop cone (G) on the
calibrated hydraulic tube.
- Fit the fork sleeve (K) to the slightly oiled fork
tube (F).
Install the stanchion assembly screw and
its seal (LM).
Tightening torque: 25 Nm.
- Using the marolotest lip seal insertion kit tool,
push the seal (J) under the groove in the
retaining ring.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
STEERING/FORK
D
E
F
K
G
LM
K
J
65