Remove the central fairing under the
saddle
Procedure 4.
- Remove the central fairing under the saddle.
• 2 plastic screws (A).
• 2 washer head screws (B).
Removal of the central cover panel
Procedure 5.
- Remove the central cover panel.
• 2 plastic screws (C).
- Disconnect the license plate light.
Removal of a lower RH or LH side fairing
Procedure 6.
- Remove the central fairing under the saddle.
See: Procedure 4. page 21.
- Remove the central cover panel. See:
Procedure 5. page 21.
- Remove the chrome trim.
- 1 plastic screws (A).
- Push the front of the trim away slightly and then
slide it towards the front of the vehicle.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
A
A
B
B
C
A
BODY PANELS
C
21