STEERING/FORK
Changing the front fork seals
- Suspend or immobilize the machine securely.
- Remove the front brake caliper from the fork tube
(2 screw).
- Remove the wheel spindle (A).
- Remove the front wheel.
-
Unscrew and remove the 2 upper screws (B)
from the fork Tee.
-
Unscrew the 2 lower screws (C) from the fork
Tee.
-
Remove the fork tubes.
- Drain the front fork. See chapter: Draining the
front fork page 39.
-
Remove the tightening screw from the internal
tube and its seal (4).
- If necessary use a mallet to dislodge the
screws.
- Separate the fork tube from the fork
stanchion (5).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
C
4
STEERING/FORK
B
5
41