Installing The Valve Clearance - PEUGEOT Django 125 Workshop Manual

SERVICE OPERATIONS
- Fit the fixed flange (3) to the crank assembly,
ensuring that it is properly positioned on the
crank assembly splines and checking that it is in
contact with the hub guide of the mobile flange.
- Fit the plain washer.
- Hold the fixed flange with tool P/N 752237.
- Fit and tighten the nut.
Tightening torque: 58 Nm.

Installing the valve clearance

- Remove the saddle storage compartment. See:
Range 2. page 20.
- Remove the central fairing under the saddle.
See: Procedure 4. page 21.
- Remove the passenger seat. See: Procedure 1.
page 20.
- Remove the battery cover.
- Disconnect and remove the battery.
- Suspend the rear of the machine.
- Remove the hatch giving access to the shock
absorber upper screw (1).
- Lift the rear of the machine.
- Remove the shock absorber upper fixing bolt.
Tightening torque: 47 Nm.
- Remove the bracket and the driver's saddle (1).
• 2 washer head screws Ø6 mm.
• 2 Ø8 mm screw.
- Remove the central fairing bracket under the
saddle (2).
• 2 Ø6 mm screw.
44
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
3
752237
1
1
2