PEUGEOT Django 125 Workshop Manual page 69

STEERING/FORK
- Unclip the hydraulic controls and the speedometer
control.
- Remove the speedometer fairing. Voir:
Procedure 11.page 26
- Remove the handlebars from the fork tube.
(1 screws and 1 nut) (1).
Tightening torque: 40 Nm.
When re-installing, use a new nut.
- Using tool P/N 757860 remove the steering
locknut.
68
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
757860
1