Removal Of The Rear Cover Assembly And Mudflap - PEUGEOT SpeedFight 3 Workshop Manual

BODY PANELS
Removal of the rear cover assembly and
mudflap
Procedure 2.
- Remove the storage compartment. See:
Procedure 1 page 19.
- Remove the lower fairing by sliding it
towards the rear of the vehicle.
• 1 screw Ø6 mm.
- Remove the rear cover assembly
(10 screw).
• 6 plastic screws (A).
• 2 screw Ø5 mm (B).
• 2 screw Ø6 mm (C).
- Disconnect the taillight.
- Remove the splash guard.
• 4 plastic screws.
- Remove the taillight.
• 4 plastic screws.
- Separate the 2 fairings (1).
• 2 plastic screws.
20
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
A
A
B
C
A
1