Removal of the storage compartment.
Procedure 1.
- Flip up the seat to the front of the vehicle.
- Remove the 2 nut caps (1).
- Remove the 4 nuts and the 4 washers (2).
- Remove the screw (3).
- Remove the storage compartment.
Removal of the grab handle.
Procedure 2.
- Remove the plastic cover (1).
- Remove the 3 bolts (2) that secure the grab
handle.
- Remove the grab handle (3).
Tightening torque: 2.5 m.daN.
Removal of the central cover panel.
Procedure 3.
- Removal of the storage compartment (see
procedure 1).
- Remove the footboard mat (1).
- Remove the 4 fixing bolts (2).
- Remove the central cover panel (3).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
3
2
2
1
3
BODY PANELS
2
1
3
15