Erasing Images; Single Frame Erasure - Olympus C-2100 Ultra Zoom Instructions Manual

ERASING IMAGES

Unwanted images can be erased using the same process for both still images
and movies. Before erasing, make sure that the protection seal has been
removed from the SmartMedia card and other image protection settings on
the camera have been cancelled.
NEVER perform the following acts while erasing pictures. They may destroy
data stored in the SmartMedia card.
Open the card cover
Eject the card
Remove the batteries
Pull the plug

Single frame erasure

1
Set the mode dial to
The card access lamp will blink and
a list of stored images will be read
out. After that, the last recorded
picture will be displayed.
2
Select the images you want to
erase using the Arrow pad.
3
Press (Erase button) .
A message asking you to confirm
the erasure will appear.
4
Make sure that YES is selected,
then press the OK button.
The selected images will be
erased.
To cancel:
Press on the Arrow pad to select
NO, then press the OK button or
(Erase button).
Be aware of the following!
.
2
3
4
YES
Confirmation screen
1
SQ
]
[
NO
77