Olympus C-2100 Ultra Zoom Instructions Manual page 196

TROUBLESHOOTING (Cont.)
SYMPTOM
The flash does not fire.
POSSIBLE CAUSES
1
The flash is pushed
down.
2
The subject is lighted.
3
The drive mode is set to
.
4
Panorama recording is
taking place.
5
The Picture effect is set
to WHITE BOARD/
BLACK BOARD.
SYMPTOM
Pictures you have already taken do not appear on the monitor.
POSSIBLE CAUSES
1
The camera is in the
Record Mode.
2
There is no picture in the
card.
3
There is a problem with
the card.
4
The camera is
connected to a TV.
5
The viewfinder is on but
there is no display.
SYMPTOM
The viewfinder display is not clear.
POSSIBLE CAUSES
1
The diopter is not
adjusted properly.
2
The brightness is not
adjusted properly.
196
CORRECTIVE ACTION
1
Slide the Flash switch to raise
the flash.
2
Set the flash to Fill-In mode.
3
Press the DRIVE button to set
to the single-picture mode.
4
Stop Panorama recording.
5
The flash does not fire in the
WHITE BOARD/BLACK
BOARD mode.
CORRECTIVE ACTION
1
Set the Mode dial to
2
NO PICTURE appears on the
monitor. Record pictures.
3
See the Error code chart.
4
The monitor does not function
when the camera is
connected to a TV.
5
Press to switch to the
monitor.
CORRECTIVE ACTION
1
Adjust the diopter again.
2
Adjust the brightness. It is
possible to adjust the
viewfinder and monitor
independently.
REF. PAGE
P. 72
P. 108
P. 107/108
P. 117
P. 135
P. 137
REF. PAGE
. P. 44
P. 124
P. 68–70
P. 203
P. 204
P. 76
P. 124
REF. PAGE
P. 64
P. 163