Olympus C-2100 Ultra Zoom Instructions Manual page 187

4
Connect the cable to the camera's USB connector or serial jack.
The first time you connect your camera to your personal computer with the
USB connector, you will need the CAMEDIA Master CD-ROM to install a
file transfer driver. To install the driver, be sure to read the CAMEDIA
Master installation guide.
5
Turn on the computer.
6
Set the camera's Mode dial to
7
Start CAMEDIA Master on the computer.
If the camera is connected to the computer with the camera turned on, the
camera may not function properly. When connecting to the computer, make
sure the camera is turned off.
When connecting to the computer, the buttons on the camera do not
function.
When the camera is connected to a TV or Personal computer,
communication is not possible.
In order to prevent battery consumption, use the AC adapter (optional).
USB connector
Serial connector (RS-232C)
.
Note:
187