Olympus C-2100 Ultra Zoom Instructions Manual page 111

3
Press to select SLOW 1 or
SLOW 2, then press the OK
button.
appears on the control
panel.
Press the OK button again to store
the setting. The Menu disappears
and the normal screen is restored.
4
Take a picture.
When SLOW 2 is selected, the
flash will fire a pre-flash before the
regular flash.
It is impossible to select
If the Mode dial is switched to S or M when
selected, SLOW 1 will be set. You can then select from SLOW 1 or SLOW 2.
Since a slow shutter speed is automatically selected in this mode, use the
tripod to prevent blurred pictures caused by camera shake.
This mode can be used with both the built-in flash and an external flash.
Unless OFF is selected in All Reset, the setting will be canceled and reset
to off when the power is turned off (p.148).
3
3
P F2.8 1/30
SLOW
BKT
MULTI
METERING
Control panel
Slow shutter
synchronization flash mode
Note:
—OFF when the Mode dial is set to S or M.
4
0.0
OFF
1
SLOW
2
SLOW
[ 2 / 5 ]
—OFF has been
111