Manual Focus - Olympus C-2100 Ultra Zoom Instructions Manual

RECORDING—range/focus (Cont.)
Setting the focus manually — Manual focus
Use this function to focus manually.
1
Press the OK button.
The focus mode selection menu
appears.
2
Press on the Arrow pad to
select MF.
and the distance indicator
appear on the control panel.
3
Press
length.
The display will be magnified to
make focusing easier.
When the distance indicator is
moved to less than 3.25 ft, the
display will switch to a shorter
distance (3-15/16" to 3.25 ft).
4
Press the OK button.
The setting is stored and MF
appears in red.
To cancel Manual focus, press the
OK button to display MF, then
press to select AF. Press the
OK button.
Focusing is not possible at
Although MF is displayed and the
distance indicator at the top of the bar,
focusing may not be possible at ∞.
When this occurs, press
the display.
When using the flash, shoot within the flash working range.
Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p.148).
The distances shown on the screen are for reference only.
The picture may go out of focus when the Zoom lever is pressed in the
Manual focus mode.
94
to select the focal
∞
:
to reset
Note:
2, 3
1, 4
P F2.8 1/800 0.0
Control panel

Manual focus

16ft
10ft
6.5ft
2.6ft
AF MF