Olympus C-2100 Ultra Zoom Instructions Manual page 59

TAKING PICTURES WHILE USING THE MONITOR
Press (Moniter button). The same sign on the finder will be displayed on
the monitor. The displayed subject will switch between the viewfinder and
monitor each time you press this button.
(Monitor button)
When the power is turned on in the Record mode (P, A, S, M, S-Prg,
icon appears in the viewfinder, and when the power is turned on in the
Display mode (
and viewfinder, press
NEVER open the card cover, eject the card, remove the batteries, or pull
the plug when the card access lamp is blinking. Doing so could destroy
stored pictures and prevent storage of pictures you have just taken.
The camera will enter sleep mode if no operations are performed during a
1-minute period. The camera will activate again as soon as you touch any
switch or button. You can adjust the sleep mode time.(P.159) Please turn
the camera off when you are not planning to use it.
), it appears on the monitor. To switch between the monitor
(Monitor button) after the power is turned on.
Note:
), the
59