Olympus C-2100 Ultra Zoom Instructions Manual page 133

6
Aim the camera at the subject and
press (Multi-Metering button).
At the bottom of the screen, a
progress bar appears.
Brightness readings are ignored
after the 9th reading.
When you press
values are reset.
When you press
Metering average (up to that point)
is memorized (AE Memory).
7
Take a picture.
eg. : When metering 2 points. (pressing
The average values for the aperture and shutter speed as calculated by
metering 2 points. These values are recalculated every time another meter-
ing point is added.
indicates the aver-
age for the 2 meter-
ing points. The
average is always
shown at the center
of the bar.
The reading with the
indicates the number of times you have
pressed the button .
between the metered and average readings.
When moves ±3 far from the center of the bar (the average reading), the
red appears.
, all metered
, the Multi-
P F2.8 1/125 0.0
button pressed.
indicates the difference
6
button twice)
indicates how
much the present
exposure you are
metering is different
from the average
exposure value.
The present expo-
sure can be fixed
by pressing the
shutter button
halfway down.
(The present expo-
sure is not added to
the average value
unless you press
the
7
button.)
133