Using The Timer - Denon UD-M31 Operating Instructions Manual

TP Search
1
Press the RDS button 3 times.
2
Press the TUNING • or ª button. (auto tuning)
3
The station is tuned in.
NOTE: " NO PROG " is displayed when there is no traffic information broadcast station.
Radio Text
To turn the RT mode on, press the PANEL button
1
on the remote control unit until the RT indicator is
lit. (Refer to page 10)
When the station currently tuned in is offering a
2
radio text message service, the message scrolls on
the display.
• When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, "NO TEXT" is
displayed on the display, then the mode automatically switches to the PS mode.
• In the same way, the mode automatically switches to the PS mode when the RT service is finished. In this case, the
mode automatically switches from the PS mode back to the RT mode when an RT broadcast is resumed.
• The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts.
• To turn the RT mode off, press the PANEL button and switch to the desired display mode.
Flashes Flashes
RANDOM
RDS
Flashes Flashes
TUNING TUNING
Program service name
"TP" and "RDS" lights.
Once the station is tuned in, "TP" and
" RDS " light and the program service
name is displayed.
CALL
PANEL
11

USING THE TIMER

The time and timer functions are incorporated in the CD receiver.
Timer Settings
Types of timer operations
EVERYDAY TIMER : Use this to turn the power on and standby at the same time every day.
ONCE TIMER : Use this to turn the power on and standby once.
SLEEP TIMER : Use this to set the power to turn standby after 10 to 60 minutes, in steps of 10 minutes (operated
from the remote control unit).
Notes on timer settings
• Be sure to set the current time beforehand.
• To listen to or record a radio program ("air check") using the timer, be sure to preset the station beforehand. (Refer to
"Presetting or naming radio station" on Page 13.)
Power Failures
If the power cord is unplugged or there is a power failure, the settings of the current time and once timer are erased and
the time display will flash. If this happens, reset the current time and the once timer.
Also check the timer and tuner presettings, and reset them if they have been cleared.
Checking the Settings
To check the timer settings, press the MENU/SET button to select TIMER.
Next, press the +/– button to select EVERYDAY or ONCE TIMER, then press the MENU/SET button repeatedly to
display in order: Timer Start mode, and (when in TUNER mode) the reception band and preset channel number, Timer
On time, Timer Off time, Press the MENU/SET button again to return to the current mode display.
Changing the Settings
Repeat the timer setting operation to erase the previous settings and set the new settings.
Clearing the Settings
Press the MENU/SET button to select TIMER. Next, press the +/– button to select EVERYDAY, then press the
button for at least 2 seconds while EVERYDAY is displayed to clear the everyday timer settings.
Press the MENU/SET button to select TIMER. Next, press the +/– button to select ONCE, then press the
for at least 2 seconds while ONCE is displayed to clear the everyday timer settings.
Note on Setting the Timer
If the time set with the timer is reached while the system power is on, the operation switches to the operation set by
the timer.
Turning the Timer Off
Follow the steps for "to turn on or turn off EVERYDAY/ONCE timer feature" to turn off the EVERYDAY/ONCE timer
mode.
NOTES:
• The timer standby mark (" ") will not light if the current time is not set. If this is the case, set the current time,
then press the TIMER button.
• Be sure to set the power to the standby mode when using the timer.
ENGLISH
(stop)
2
(stop) button
2
15