Table of Contents
Advertisement
Companion programming falls under System prgrming and
has the following subheadings:
Registration
Radio data
For other programming operations refer to Modular ICS
Installer Guide.
ƒ••¤flfl‹››
Entering programming for installers
1. Press
same as
display shows Password:.
2. Enter the Installer password. The default password is
CONFIG (266344). The display shows
Terminals&Sets. Three triangular indicators
on the vertical display between the rows of buttons.
3. Place the programming overlay over the buttons pointed to
by the indicators
Entering programming for system coordinators
The person on staff who is in charge of making changes on the
Norstar system is called the system coordinator. The everyday
Companion programming done by system coordinators is
described in MICS-XC Norstar-Companion System
Coordinator Guide.
Some system coordinators need to be able to program more
advanced settings and functions in order to carry out the day-
to-day requests and upkeep of the Norstar system. These
coordinators are usually dedicated communications specialists
who work with large Norstar systems or other telephone
systems like PBX or Centrex.
P0881594 Issue 01
lets you enable and disable registration and
verify which portable DNs are available
lets you view and change cell and radio
settings
ƒ••Ç؈ÏÈÌ
º
.
Programming / 57
which is the
. The
º
MICS-XC Norstar-Companion Installer Guide
appear
Advertisement
Table of Contents
