Testing; Testing The Companion Portable Telephones; Testing The Base Stations - Nortel Companion MICS-XC Installation Manual

Testing

Testing the Companion portable telephones

You must register all portable telephones before testing them.
For more detail on registering portable telephones, refer to
MICS-XC Norstar-Companion System Coordinator Guide and
the Telephone Registration Instructions.
1. Verify that the portable telephone is ON.
2. Establish a connection to get internal dial tone. If no dial
tone is present, the portable telephone may not be
registered. Try to register the portable telephone again.
3. Verify that the portable telephone is using the correct
registration slot.
4. Verify that the portable telephone can make a call.
5. Verify that the portable telephone has been assigned the
correct extension number by calling a wired telephone and
viewing the line number displayed.
Tip -
programming when moving a Companion Base Station
from one port to another.

Testing the Base Stations

1. Verify that the ICS is ON.
2. Verify that re-evaluation is complete.
3. Verify that the Base Station has been powered up correctly
by checking that the green light is ON and the red light is
OFF.
If the red light is flashing, it indicates that one of the
following problems may exist:
P0881594 Issue 01
Automatic Telephone Relocation does not retain
MICS-XC Norstar-Companion Installer Guide