Getting The Tools To Mount The Chassis In A Rack - Nortel Passport 241-5101-200 Installation Manual

24 Chapter 2 Preparing for the hardware installation

Getting the tools to mount the chassis in a rack

To mount the chassis in a rack, you will need one or more of the following
tools:
•
•
•
•
241-5101-200 R2.2
9.5 mm wide flat-bladed screwdriver for 19" or ETSI rack installation.
10 mm A/F nut driver for NEBS rack installation.
Pozidrive screw driver suitable for a M4 screws for assembling the
mounting brackets to the chassis.
Small flat-bladed screwdriver for securing the "D-type looking" screws.