Nortel M3820 Installation And Administration Manual page 96

Configuring the IP Adapter unit using the telephone menu
11 The telephone display asks if you want to modify the SPRE code that you
must dial to deregister from, or end a work session, the Deregistration
SPRE code, similar to the following:
Modify Dereg. SPRE?
[1-Yes 2-No]
IF you want to
modify the
number that you
must dial to end a
work session (in
an ACD
environment, for
example),
retain the current
deregistration
SPRE code,
96
THEN do the following:
1 Press 1.
2 Press the Hold key.
Result: The telephone display prompts you to enter
a new deregistration SPRE code. The telephone
display also shows the current deregistration SPRE
code, similar to the following:
Enter Dereg. SPRE Code
#96
3 Press the digits of the new deregistration SPRE
code.
Note: Refer to the Note on page 93 for information
on pound signs (#) in SPRE codes.
4 Press the Hold key.
5 Proceed to step 12 on page 97.
1 Press 2.
2 Press the Hold key.
Digital Telephone IP Adapter Installation and Administration Guide
Standard 2.1