January 2005
IF you want to
modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
(continued)
not modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
18
The telephone display asks if you want to save the configuration you have
just entered, similar to the following:
Save Configuration?
[1-Yes 2-No]
IF you want to
discard your most
recent
configuration
changes,
Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu
THEN do the following:
6 If this is not the correct model number of your
telephone set, press 2 and return to step 5, above.
7 If this is the correct model number of your telephone
set, press 1.
8 Press the Hold key.
9 Proceed to step 18, below.
1 Press 1.
2 Press the Hold key.
THEN do the following:
1 Press 2.
2 Press the Hold key.
Result: The telephone display asks if you want to
reboot the Digital Telephone IP Adapter unit, similar
to the following:
Reboot Unit?
[1-Yes 2-No]
3 Proceed to step 19 on page 108.
107