Nortel M3820 Installation And Administration Manual page 148

Using the digital telephone
Message
Offline Mode
Online Mode
Port Already in
Use
Port Not Logged
In
Release and Try
Again
Bandwidth Limit
148
Description
This means you cannot place calls through the host
PBX.
Notes:
If you need to place a call through the host PBX
!
while in offline mode, enter the online SPRE
code. Refer to "SPRE Codes: Online" on page
119 for further details.
The Offline Modeïmessage is not persistent
!
on the M3903 telephone display. This message
sometimes only displays for part of the Offline
period.
This means you can place and receive calls through
the host PBX.
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on
the RLC.
This message appears if the port that you are
attempting to log on to is already being used by
someone else.
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on
the RLC. Your station is logged off.
There are not enough DSP resources to process the
call. Try again at a later time.
Note: Ensure to initiate calls from the appropriate
calling key according to the following parameters:
Use the host calling key to call someone at the
!
host PBX site.
There is not enough bandwidth to complete the
requested action. Try again at a later time.
Digital Telephone IP Adapter Installation and Administration Guide
Standard 2.1