Nortel M3820 Installation And Administration Manual page 110

Configuring the IP Adapter unit using the telephone menu
IF you want to
confirm your
instruction to
restart the Digital
Telephone IP
Adapter unit,
shut down the
Digital Telephone
IP Adapter unit,
thereby disabling
all functionality
on the unit,
110
THEN do the following:
3 Press 1 to restart the Digital Telephone IP Adapter
unit.
4 Press the Hold key.
Result: The telephone display informs you that it is
restarting the system, similar to the following:
Restarting the System
Please Wait...
5 When the system restarts, the telephone display
returns to its normal state, showing the time and
date, similar to the following:
JAN 01 12:13 P
6 If the telephone is connected to a PBX, it is ready to
send and receive telephone calls as normal.
7 If the telephone is not connected to a PBX, the
telephone display shows a message similar to the
following:
HOSTLESS MODE
1 Press 0.
2 Press the Hold key.
Result: The telephone display asks you to confirm
your instruction to shut down the Digital Telephone
IP Adapter unit, similar to the following:
Confirm?
[1-Yes 2-No]
Note: Only choose the shut down option when you
have physical access to the remote unit. You must be
able to disconnect then reconnect power to the Digital
Telephone IP Adapter unit to be able to access the
unit again.
Digital Telephone IP Adapter Installation and Administration Guide
Standard 2.1