Nortel M3820 Installation And Administration Manual page 135

January 2005
Auto Upgrade Configuration field descriptions
Field
Status
TFTP Server: IP Address
Start Auto Upgrade
Frequency
Time
Day
Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager
Description
Click on the Enable option button if you want to
!
automatically or on a scheduled basis query a
predefined TFTP server and upgrade the firmware for
Remote Gateway 9100 Series units.
Click on the Disable option button if you do not want
!
to automatically or on a scheduled basis upgrade the
firmware for Remote Gateway 9100 Series units.
The default is Disable.
Enter the IP address of the TFTP server you want to query
for the upgrade.
Click on the Start Auto Upgrade button to force the auto
upgrade process to begin regardless of the mode and time
configuration in the auto upgrade configuration.
Note: Use caution when forcing the auto upgrade process
as the system performs a self-reset on all units to make the
new firmware active once the download of new firmware
is complete.
Click on the option button that identifies how often you
want the unit to perform the auto upgrade process:
Once a Day
!
Once a Week
!
Once a Month
!
Select the time of day that you want the unit to perform the
auto upgrade process.
Select the day when you want the auto upgrade process to
be performed (if you selected "Once a Week" in the
Frequency field).
135