Preparing To Be Polled - Panasonic DP-1810F Operating Instructions Manual

Polling

Preparing to be Polled

In order to let other stations poll your machine, you must prepare your machine with a document stored in
memory. Be sure to set the polling password before storing the document into memory. After being polled,
the documents stored in the memory will be erased automatically. To retain the documents in memory so
that they can be polled repeatedly change Fax Parameter No. 27 (POLLED FILE SAVE) to "Valid".
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
1b
2
3
4
5
NOTE
70
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
1
Press
2 ORIGINAL SIZE
Enter a 4-digit polling password. (See Note 3)
Ex:
4 3 2 1
The document(s) will be stored into memory.
1. You can still send or receive documents even when set to be polled.
2. Only 1 polled file can be stored in memory. If you need to add document(s) into the same
polled file, see page 84.
3. If you have set the polling password in Fax Parameter No. 26, the password will appear on the
display. You can still change the password temporarily by overwriting it with a new one.
to select the original size.
to select the "FAX/EMAIL" mode.
ENTER STATION(S)
THEN PRESS START 00%
POLLING
1:POLLING 2:POLLED
POLLED
PASSWORD=1234
POLLED
PASSWORD=4321
* STORE *
PAGES=001
* STORE * COMPLETED
TOTAL PAGES=005
NO.=❚
NO.015
01%
24%