Retry An Incomplete File - Panasonic DP-1810F Operating Instructions Manual

Retry an Incomplete File

If a memory communication has been unsuccessful due to a busy line or no answer, the document you
stored is automatically erased from memory after the last redial.
If you need to retain the document even if the communication failed, change the setting of Fax Parameter
No. 31 (INC. FILE SAVE) to Valid in advance. (See page 30)
To retry the incomplete file, print a File List first to verify the file number. (See page 78)
Then, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
Enter the file number or use
that you want to retry.
Ex:
0 0 1
4
Your machine will retry the file and start dialling
immediately.
1. To confirm or change the entered telephone number for the file, see page 78 and 80.
NOTE
2. If you set Fax Parameter No. 31 to Valid, all incomplete files will remain in the memory. To
avoid memory overflow, please check the memory content frequently. We recommend that
optional flash memory card is installed when this function is used. See the Operating
Instructions (For Copier) page 51.
to select the "FAX/EMAIL" mode.
or to select the file
Edit File Mode
EDIT FILE MODE (1-6)
∨ ∧
ENTER NO. OR
∨ ∧
ENTER FILE NO.OR
FILE NO.=❚❚❚
∨ ∧
ENTER FILE NO.OR
FILE NO.=001
* STORE * NO.001
* DIALLING * NO.001
(Station name)
85