Setting Your Logo - Panasonic DP-1810F Operating Instructions Manual

Setting Your LOGO

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your transmission.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
.
3
repeatedly until display shows;
4
Enter your LOGO (max. 25 characters and digits) by using
the Keypad. (See page 17)
Ex:
P A N A S O N I C
If you make a mistake, use
one space beyond the incorrect character, press
then re-enter the new character.
If more than 19 characters are entered, the left side
characters will scroll off the display.
5
to select the "FAX/EMAIL" mode.
or to move the cursor
CLEAR
User Parameters
SET MODE (1-4)
∨ ∧
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
❚
LOGO
PANASONIC❚
19