Setting RCV To Memory
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
4
1. When the memory overflows, the machine will stop receiving and release the line. The
NOTE
machine will not answer the next incoming call until there is space available in the memory.
2. We recommend that optional flash memory card is installed when this function is used. See the
Operating Instructions (For Copier) page 51.
Receive To Memory
to select the "FAX/EMAIL" mode.
SELECT MODE
∨ ∧
ENTER NO. OR
RCV TO MEMORY=OFF
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
15-MAR-2002 15:00
< RCV TO MEMORY >
(1-5)
89